How to create vrf

 

R
R1#CONF
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
R1(config)#IP VRf IBM
R1(config-vrf)#EXIT
R1(config)#IP VRf DELL
R1(config-vrf)#EXIT
R1(config)#INTerface F0/0
R1(config-if)#IP VRf FORwarding IBM
R1(config-if)#IP ADDress 13.1.1.1 255.255.255.0
R1(config-if)#NO SH
R1(config-if)#EX
*Sep  2 09:47:22.371: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Sep  2 09:47:23.371: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config)#INTerface F2/0
R1(config-if)#IP VRf FOrwarding DELL
R1(config-if)#IP ADDress 14.1.1.1 255.255.255.0
R1(config-if)#NO SH
*Sep  2 09:47:56.939: %LINK-3-UPDOWN: Interface FastEthernet2/0, changed state to up
*Sep  2 09:47:57.939: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0, changed state to up
R1(config-if)#EX
R1(config)#INT S5/0
R1(config-if)#IP VRf FO
R1(config-if)#IP VRf FOrwarding IBM
R1(config-if)#IP ADDress 12.1.1.1 255.255.255.0
R1(config-if)#NO SH
R1(config-if)#EX
*Sep  2 09:49:30.759: %LINK-3-UPDOWN: Interface Serial5/0, changed state to up
R1(config-if)#EX
*Sep  2 09:49:31.767: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial5/0, changed state to up
R1(config)#INT S5/1
R1(config-if)#IP VRf FOrwarding DELL
R1(config-if)#IP ADDress 21.1.1.1 255.255.255.
*Sep  2 09:49:57.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial5/0, changed state to down
R1(config-if)#IP ADDress 21.1.1.1 255.255.255.0
R1(config-if)#NO SH